Back to top

Pineapple stitch top crochet pattern

image: 
lace-tank-top-crochet-pattern
body: 

Yarn - Bernat Cotton-ish (cotton ball) / light 3/ 2.4 oz (70 g) / 282 yards (258 m) / about 2 balls needed
Hooks - F/5 – 3.75 mm and E/4 – 3.50 mm or other size hooks needed for the gauge
Gauge - About 18 dc goes into 4 inches (10 cm)
Top Size - M
Complexity - Advanced beginner

Images & Captions: 
Image: 
crochet-summer-top
Body: 

Women’s sleeveless lace summer top crochet pattern – pineapple stitch
Step-by-step crochet instructions
Step 1
Crochet the blouse from top to bottom.
Make a foundation chain of 153 chs (I count all chs including the loop on my hook). Then join it into a ring with the slip stitch.
1st round – ch3, dc to end plus sl.st.1 into 3rd ch
2nd round – [ch5, sk2, sc1, (ch5, sk4, sc1) x 7] to last repeat; ch5, sk2, sc1, (ch5, sk4, sc1) x 6, ch5, sk4, sl.st.1
3rd round – (hdc1, dc3, ch1, dc3, hdc1) into each arch to end + sl.st.1
4th round – sl.st.3, [sc1 under ch between dc3s, ch6] to end + sl.st.1 into 1st sc ch of the round
5th round – ch3, dc1 into sm.ch, dc55, [inc1, dc55] to end + sl.st.1 into 3rd ch
Step 2
Back part
1st row (right side) – ch3, dc1, sk1, inc1, ch2, sk2, Vst1, ch2, sk2, inc1, [ch3, sk3, sc1, (ch3, sk2, sc1) x 3, ch3, sk3, inc1, ch2, sk2, Vst1, ch2, sk2, inc1] to end; sk1, dc2 + RC3
2nd row – (wrong side) – dc1 between 2 dcs of prev.row, inc1 into inc of prev.row, ch3, Vst* into Vst of prev.row, ch3, inc1 into inc of prev.row, [ch3, sc1 into 2nd ch of 1st arch, ch3, sc1 into 2nd ch of 2nd arch, ch3, sc1 into 2nd ch of 3rd arch, ch3, inc1 into inc, ch3, Vst* into Vst, ch3, inc1 into inc] to end; inc1 between dc and initial 3chs of prev.row + RC3
3rd row – dc1 into inc, inc1 into inc, ch2, trc9 into Vst*, ch2, inc1 into inc, [ch3, sc1 into 2nd ch of 1st arch, ch3, sc1 into 2nd ch of 2nd arch, ch3, inc1 into inc, ch2, trc9 into Vst*, ch2, inc1 into inc] to end; inc1 between dc and initial 3chs of prev.row + RC3
4th row – dc1 into inc, inc1 into inc, ch2, dc3 above 1st 3 trcs, inc1, dc1, inc1, dc3 (you should have 11 dcs above 9 trcs), ch2, inc1 into inc, [ch3, sc1 into 2nd ch of arch, ch3, inc1 into inc, ch2, dc11 above trc9, ch2, inc1 into inc] to end; inc1 between dc and initial 3chs of prev.row + RC3
5th row – dc1 into inc, ch2, inc1 into inc, ch2, sc1 into 1st dc ch of prev.row, (ch3, sc1, sc1) x 5, ch2, inc1 into inc, [ch2, inc1 into sc ch, ch2, inc1 into inc, ch2, sc1 into 1st dc ch of prev.row, (ch3, sc1, sc1) x 5, ch2, inc1 into inc] to end; ch2, inc1 between dc and initial 3chs of prev.row + RC3
6th row – dc1 into inc, ch3, inc1 into inc, ch2, sc1 into 2nd ch of arch, (ch3, sc1 into 2nd ch of arch) x 4, ch2, inc1 into inc, [ch3, inc1 into inc, ch3, inc1 into inc, ch2, sc1 into 2nd ch of arch, (ch3, sc1 into 2nd ch of arch) x 4, ch2, inc1 into inc] to end; ch3, inc1 between dc and initial 3chs of prev.row + RC3
7th row – dc1 into inc, ch1, inc1 into 2nd ch of 3chs, ch1, inc1 into inc, ch2, sc1 into 2nd ch of arch, (ch3, sc1 into 2nd ch of arch) x 3, ch2, inc1 into inc, [ch1, inc1 into 2nd ch, ch1, inc1 into inc, ch1, inc1 into 2nd ch, ch1, inc1 into inc, ch2, sc1 into 2nd ch of arch, (ch3, sc1 into 2nd ch of arch) x 3, ch2, inc1 into inc] to end; ch1, inc into 2nd ch, ch1, inc1 between dc and initial 3chs of prev.row + RC3
8th row – dc1 into inc, (ch2, inc1 into inc) x 2, ch2, sc1 into 2nd ch of arch, (ch3, sc1 into 2nd ch of arch) x 2, ch2, inc1 into inc, [(ch2, inc1 into inc) x 4, ch2, sc1 into 2nd ch of arch, (ch3, sc1 into 2nd ch of arch) x 2, ch2, inc1 into inc] to end; ch2, inc into inc, ch2, inc1 between dc and initial 3chs of prev.row + RC3
9th row – dc1 into inc, (ch3, inc1 into inc) x 2, ch2, sc1 into 2nd ch of arch, ch3, sc1 into 2nd ch of arch, ch2, inc1 into inc, [(ch3, inc1 into inc) x 4, ch2, sc1 into 2nd ch of arch, ch3, sc1 into 2nd ch of arch, ch2, inc1 into inc] to end; ch3, inc into inc, ch3, inc1 between dc and initial 3chs of prev.row + RC3
10th row – dc1 into inc, (ch1, inc1 into 2nd ch, ch1, inc1 into inc) x 2, ch2, sc1 into 2nd ch of arch, ch2, inc1 into inc, [(ch1, inc1 into 2nd ch, ch1, inc1 into inc) x 4, ch2, sc1 into 2nd ch of arch, ch2, inc1 into inc] to end; ch1, inc into 2nd ch, ch1, inc into inc, ch1, inc1 into 2nd ch, ch1, inc1 between dc and initial 3chs of prev.row + RC3
11th row – dc1 into inc, ch2, (inc1 into inc, ch2) x 3, (trc2 into inc) x 2, ch2, [(inc1 into inc, ch2) x 7, (trc2 into inc) x 2, ch2] to end; (inc into inc, ch2) x 3, inc1 between dc and initial 3chs of prev.row
Step 3
Front part
Attach the yarn where your corner is above 1st dc of inc
1 – 10 rows of the front part = 1 – 10 rows of the back part.
Step 4
Join back and front parts together
Work with the yarn of the back part and continue crocheting the 11th row of the front part just like 11th row of the back part. That way you join the two pieces from one side.
At the end of the 11th row (front part), work sl.st.1
Step 5
Body
1st round – ch3, dc1 between 2 inc., ch2, (inc1 into inc, ch2) x 3, dc2 between trcs, ch2, [(inc1 into inc, ch2) x 7, dc2 between trcs, ch2] x 2, (inc1 into inc, ch2) x 3, dc2 between 2 inc, ch2, (inc1 into inc, ch2) x 3, dc2 between trcs, ch2, [(inc1 into inc, ch2) x 7, dc2 between trcs, ch2] x 2, (inc1 into inc, ch2) x 3 + sl.st.1
Use a smaller size crochet hook
2nd round – ch3, dc1 into inc, ch2, [inc1 into inc, ch2] to end + sl.st.1
3rd and all other rounds work as 2nd round until you crochet to about your waist line. Then crochet other rounds as 2nd round until you reach the desired length of the blouse, using a larger size crochet hook.
One round before the very last round, work similar to the 2nd round, but work dc2 instead of ch2 or
- ch3, dc1 into inc, dc2, [inc1 into inc, dc2] to end + sl.st.1
Work sc to end for the very last round.
Step 6
Edges
Sc to end around your armholes and neckline using a smaller size crochet hook.

Image: 
crochet-pineapple-stitch-blouse
Body: 

Abbreviations
ch – chain
dc – double crochet
hdc – half double crochet
inc – increase – dc2 into 1 ch
prev.row – previous row
sc – single crochet
sk – skip a chain
sl.st. – slip stitch
sm.ch – the same base chain
trc – triple crochet
Vst – V-stitch – (dc1, ch1, dc1) into 1ch
Vst* – (dc1, ch2, dc1) into 1ch

Image: 
crochet-stitch-for-lace-tank-top
Body: 

Crochet Stitch

Body: 

Crochet pineapple stitch tank top - lace blouse crochet pattern

Body: 

Comments

Hi Sana, I started crocheting

Hi Sana, I started crocheting this one and I’m using the same hook that you use,Since my size is Xl , can you help me pls. I’m using a little bit thicker than you use. I’m at the back part now. Thank you.

Hi Sana, I’m watching your

Hi Sana, I’m watching your tutorial and it’s not clear for me, where do you attached to do the front part.pls. Advise.thanks.

Hi Sana, I don’t know what

Hi Sana, I don’t know what happen but I did not get any reply from you. But it’s ok I figure it out and I wanna share my finished top.

Your work is absolutely

Your work is absolutely gorgeous. I love it. I'm very glad that you figured it out and was able to finish this beautiful piece. Congratulations!

Hi sabrinamarie909,

Hi sabrinamarie909,
For the xl size, I would work the pattern the same way to step 4, and then add chains/repeats under arms while joining back and front parts together.
For that (step 4), work 10 chs, then continue crocheting the 11th row of the front part. At the end of the 11th row (front part), ch10 also, and then work sl.st.1.
1st round (step 5) – ch3, dc1 into inc., ch2, (inc1 into inc, ch2) x 3, dc2 between trcs, ch2, [(inc1 into inc, ch2) x 7, dc2 between trcs, ch2] x 2, (inc1 into inc, ch2) x 4, (sk2, dc2, ch2) x 2, sk2, (inc1 into inc, ch2) x 4, dc2 between trcs, ch2, [(inc1 into inc, ch2) x 7, dc2 between trcs, ch2] x 2, (inc1 into inc, ch2) x 4, (sk2, dc2, ch2) x 2, sk2 + sl.st.1.
Happy crochet!

I would work the pattern

I would work the pattern using a larger size crochet hook to adjust the gauge. In addition, I'd add one more pineapple to each front and back parts. Work the step 1 totally the same way as I did.
Step 2
1st row (right side) – ch3, dc1, sk1, inc1, ch2, sk1, Vst1, ch2, sk1, inc1, [ch3, sk2, sc1, (ch3, sk1, sc1) x 3, ch3, sk2, inc1, ch2, sk1, Vst1, ch2, sk1, inc1] times three/to end; sk1, dc2 + RC3
After that follow the pattern exactly. Happy crochet!

Pages